Danfoss ECtemp 530
3
Installation Guide
1
Introduction
ECtemp 530 is an electronic thermostat provided with a
2- pole switch and a wire sensor to measure and control the
desired floor temperature. It can be either flush-mounted
(standard) or surface-mounted (using special box).
The thermostat has a button for adjusting the temperature
setting with a scale from (
) 1 to 6 (each step corresponds
to approximately 8 °C). Furthermore, it has a LED indicator
showing standby periods (green light) and heating periods
(red light).
More information on this product can also be found at:
ectemp.danfoss.com
Table of Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Technical Specifications . . . . . . . . . . . . 4
1.2 Safety Instructions . . . . . . . . . . . . . . . . 5
Mounting Instructions . . . . . . . . . . . . . . . . . 7
3 Settings . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . 12