![background image](http://html1.mh-extra.com/html/danfoss/dsf090/dsf090_application-manual_3439655025.webp)
1
2
3
4
CC-000009
1
2
3
4
Tightening torque 15Nm
Not supplied HM8mm 0.31 inch
Tightening torque 15 Nm
3mm (0.12inch) Thickness
Supplied with the compressor
Included in manifolding kit
Not supplied
Figure 28: DSF270-325
1
CC-000010
4
5
2
3
Figure 29: DSF130-175-200
7
6
5
CC-000011
Table 15: Additionnal rigid spacer
Additionnal rigid spacer
Additional right spacer(to be added on the smallest compressor of the tan‐
dem)
DSF215U-230U-255U-275U-315U-331U-355U-375U
7mm
DSF300U
14mm
Tandem requirements DSF465T-525T-600T mounting
The compressors must be mounted with rigid mounting spacers on rails. Rubber grommets and spacers must be
installed below the rails.
The rigid mounting spacers and rubber grommets are included in tandem accessory kits.
Tandem requirements DSF400X-470X-500X-525X mounting
The large compressor, DSF270,325, is mounted with rigid spacers on the rails.
The DSF130, 175,200 compressor is fixed on beams by rigid spacer, and the beams are mounted with rigid spacers
on the rails. Rubber grommets and spacers must be installed below the rails.
© Danfoss | Climate Solutions | 2023.06
AB309735209512en-000603 | 25
Scroll compressors, DSF090 to DSF530 | Mechanical connections