Danfoss DHP-AL, Руководство пользователя

Страница: 17 / 42

Danfoss – 17
VUBMF102
Symbol Meaning
TANK Indicates the temperature level in the water heater. During charg-
ing, the tank is filled and filling starts at the set start temperature.
A lightning symbol by the symbol indicates peak heating charging
(legionella function).
⚠⚠⚠⃞
SQUARE Either indicates that the operating pressure switch has deployed, or
that the hot gas temperature has reached its maximum temperature.
Symbols specific to DHP-AL
Displays the operating status of the heat pump using symbols.
Symbol Meaning
DEFROST Displayed if defrosting is active.
FAN Displayed if the fan is active L=Low speed and H= High speed.
Text
Appears with applicable heat pump operating status text.
Message Meaning
ROOM --°C Shows the set ROOM value. Factory setting: 20°C.
If the room sensor accessory is installed, the actual temperature is first
displayed and then the desired indoor temperature within brackets.
ERR PHASE
SEQ.
Alarm that indicates that there is an incorrect phase sequence to the
compressor. Only display and only the first 10 minutes.
HIGH RETURN Indicates that the high return temperature prevents the compressor’s
operation.
START Indicates that there is a demand for heating production and that no start
delay is active.
EVU STOP Indicates that the additional function EVU is active. This means that the
heat pump compressor and addition are off as long as EVU is active.
NO DEMAND
HEAT
Indicates that there is no heating production demand.
HIGHPRESS
ERROR
Alarm that indicates that the high pressure switch has deployed.
LOWPRESS
ERROR
Alarm that indicates that the low pressure switch has deployed.
MOTOR P
ERROR
Alarm that indicates that the motor protection has deployed.
BRINEFLOW
LOW
Appears if the accessory flow switch is installed. Indicates that the flow in
the brine system is low.