Danfoss APP S 674 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 38 / 72

38
180R9270 / IOM APP S 674 - v01 / 03.2013
Instruction APP S 674 pumps
2
180R9276 / 521B1245 / DKCFN.PI.013.Z1.02 / 03.2013
1. Identification
Pump:
Code No:
Serial No:
ccm / rpm:
900 ≤rpm≤1800
0.5 bar ≤ Pin ≤ 5 barg
20 bar ≤ Pout ≤80 barg
4°C ≤ Tmedia ≤ 95°C
Media:
EX II 2 G bc T3
Warning
Use only 10 µm filter with a
β-value>5000. Bleed the
pump befor initial startup.
1. Identification
2. System design
2.1 Open system design
2.2 RO system with APP S 674 pump
2.3 Protection from too high pressures
3. Building up the pump unit
3.1 Mounting
3.2 Direction of rotation
3.3 Orientation
3.4 Connections
3.4.1 APP S 674 3.0-3.5
3.4.2 APP S 674 5.1-9.0
3.4.3 APP S 674 21-38
4. Initial start-up
4.1 APP S 674 3.0-3.5
4.2 APP S 674 5.1-9.0
4.3 APP S 674 21-38
5. Technical data
6. Operation
6.1 Temperature
7. Long-term shutdown
8. Storage
9. Service and warranty
9.1 Repair
9.2 Recommended service intervals
10. EC Declaration of Conformity
Our CLP RO pumps have changed name as listed below:
CLP674 050-058 RO will now be called APP S 674 3.0-3.5
CLP674 085-152 RO will now be called APP S 674 5.1-9.0
CLP674 365-640 RO will now be called APP S 674 21-38
This is ONLY a name change.
Table of Contents
Instruction APP S 674
APP S 674 3.0-3.5
APP S 674 5.1-9.0
APP S 674 21-38
(180R9276)