Instruction
Disassembling and assembling APP S 674 2.0-3.5
11
180R9281 / 521B1275 / DKCFN.PI.013.C3.02 / 05.2013
16. Ensure the retainer plate is oriented
correctly.
21. Screw in the rest of the bolts and tighten all
screws to a torque of 30 +/- 3 Nm.
17. Lubricate and position the pistons in the
retainer plate and cylinder barrel.
18. Lubricate the piston shoes. Tilt retainer
plate for easier placement of swash plate. If
the swash plate has been disassembled
from end flange, see page 14 for assem-
bling of swash plate. Remember to place
the guide pin in the housing.
19. Change and lubricate O-ring in the end
flange. Position end flange aligning pin
hole over the guide pin.
20. Lubricate and place two bolts in end flange.
Turn each bolt one round at a time to
ensure mounting flange is mounted as
straight downwards as possible. Be careful
not to squeeze the O-ring.
