Instruction
Disassembling and assembling APP S 674 2.0-3.5
16
180R9281 / 521B1275 / DKCFN.PI.013.C3.02 / 05.2013
6.
Disassembling and
assembling of the
flushing valve
1.
Remove shaft seal cover.
3.
Remove complete flushing valve set.
4.
Flushing valve parts
2.
Carefully push the flushing valve up
through the outlet connection, using a
small screwdriver.
5.
Press a new spring onto shoulders of the
poppet guide and the poppet. The spring
must be fastened on both collars. Then
mount new O-ring on the poppet guide.
Turn flushing valve upside down. If spring is
not properly assembled, it will fall of.
6.
Lubricate valve with clean filtered water
and push by hand the valve into the hole.
