Instruction
Disassembling and assembling APP S 674 2.0-3.5
6
180R9281 / 521B1275 / DKCFN.PI.013.C3.02 / 05.2013
17. Remove the retainer guide and the spring.
18. Remove the guide pin.
19. Pull the cylinder barrel straight upwards in
a continuous lift to ensure no damage of
house bearing. This can only be done if the
shaft seal is removed.
WARNING:
If the cylinder barrel is dropped or
lowered too fast into housing, the main
bearing/shaft bearing might be damaged.
20. Place cylinder barrel upside down. For
further disassembling of cylinder barrel
and valve plate see page 15.
21. Remove the port plate in the housing by
hand.
