Danfoss Akva Lux II TDv, Руководство по монтажу и установке, Страница: 4 / 28

4 DKDHR 145X2085 / AQ428255318526en-010101 Danfoss District Energy
Instructions Akva Lux II TDv
Reach
All products of the Akva Lux II TDv series comply with the provisions of
the REACH regulation.
We are therefore obliged to inform our customers about the presence
of substances according to the SVHC candidate list, if they are present.
We hereby inform you: This product contains brass parts containing lead
(CAS 7439-92-1) in a concentration above 1% (w/w) .
Potential equalization / grounding
Equipotential bonding is understood as all measures for eliminating elec-
tri-cal potential differences (contact voltages), which can occur between
eg two pipelines. Equipotential bonding is an important measure for pro-
tec-tion against electric shock. Equipotential bonding reduces corrosion
in the heat exchanger, instantaneous water heaters, district heating sta-
tions and plumbing installations. Equipotential bonding should be in ac-
cordance with the provisions 60364-4-41: 2007 and IEC 60364-5-54: 2011.
Binding point is marked with a grounding symbol on the bottom right
corner of the mounting plate and there is a hole in the mounting plate
and a label with grounding symbol.
Disposal
The station consists of materials that must not be disposed of with
household waste. Disconnect the entire energy supply and disassem-
ble the product for disassembly and dispose of it in accordance with
local regulations.
Disposal
Dispose of the packaging in accordance with the local regulations for
disposal of used packaging materials.
The substation is made of materials that cannot be disposed of together
with household waste.
Close all energy sources and disconnect all connection pipes. Disconnect
and dismantle the product for disposal in accordance with the applicable
local regulations for the disposal of the individual components.
2.
INSTALLATION INSTRUCTIONS, SAFETY AND HANDLING