2
Instructions RI8SS102 © Danfoss 04/2019
AK-XM
208C
AD
AP
-K
OOL®
The Product contains electrical components
And may not be disposed together with domestic waste.
Equipment must be separate collected with Electrical and Elec-
tronic waste. According to Local and currently valid legislation.
Check the
correct open/close function
1. Remove the power supply to
the communication module
AK-CM 101A
2. Check the valve is closeing
(If it is already closed, it will remain closed)
3. Connect the power supply again.
By reconnecting power to the AK-CM 101A
module the stepper module start calibrating
the valve to closed position.
If wires are wrongly connected the valve is
opening to 100%.
