A-Series rigging components
2.3.1 Z5454 AL Safety chain
The Z5454 AL Safety chain is supplied with the Flying frame.
Specification
Lifting chain (DIN EN 818)
2-leg, 6 mm
Grade
10
Nominal length per leg incl. hooks
534 mm (21")
Load rating
1.4 t (WLL)
2.4 Locking pins
WARNING!
Potential risk of personal injury and/or
damage to material!
The steel wires of the Locking pins are not intended to carry any
load. The cabinet's weight must only be carried by the Front and
Splay/Rear links in conjunction with the front and rear rigging
strands of the loudspeaker cabinets and the rigging components.
Ensure all Locking pins are fully inserted and securely locked
before lifting any load.
The A-Series loudspeaker cabinets and rigging components are
equipped with dedicated Locking pins.
Note: The Locking pins are undetachably attached to the
different rigging components on the cabinet using steel wires.
Throughout this manual these steel wires are not shown in the
corresponding illustrations.
Functionality (Quick lock mechanism)
Proceed as follows:
1. Press the button to
release the locking mechanism (
[r]).
2. Remove the Locking pin through the respective link or socket.
3. Insert the Locking pin through the respective link or socket until
it is fixed in place.
4. Release the button to
lock the pin (
[l]).
5. Recheck the Locking pin is securely locked by briefly pulling
the Locking pin towards you.
d&b Z5455/Z5459 Rigging manual 1.1 en
8
