Site 8/8
Copyright: www.dancar.dk
Settings
Learning new transmitter
Turn on the new transmitter by holding down the «ON» for more than 3 sec. Once the LED «A» lights up, release the «ON» botton,
The LED lights RED the next 30 sec. Within this time you must insert the code jumper in the receiver «code bridge» pins. Doing this will
automatic pair the units, confirmed by all led´s are flashing GREEN.
Remove
the code jumper. Remote are ready to use!
Only the new coded remote can operate the system.
Note:
A remote who
already
has been paired must be cleared in key-memory before attempting the «Learning new transmitter»
procedure . To clear key-memory please make following rutine:
Press the «UP» botton and hold it down. Now, press also the «ON» botton and hold it down. Holding these two bottons down at same
time in more than 3 sec. will clear the key-memory. The transmitter is ready for « Learning new transmitter»
Change setting for the load to surface
Please turn ON the transmitter. Insert the
Code Jumper
in the controlbox
.
Blue LED in box is lightning as long as Jumper is inserted
.
With the remote please select the desired program you wish, by short press of the «ON» botton. When desired program LED
lights up, please press the «UP» botton to set/save.
Remove the Code Jumper. System is ready to use.
Program. A small caravan (default setting)
Program. B medium caravan
Program. C large caravan
This setting will change only the load provided to the ground when using the «automatic down» function. This is normally not to be
changed since it is made during the installation. Remember: too high load can damage the construstion of the caravan.
Warrenty
Factory warrenty is 2 years from the day of sale. Warrenty covers all parts except the remote battery. Warrenty is granted under
condition of normal usage. The product is only intented to be used for private purpose, not commersial use.
Any claim is rejected if parts or product are used unintented or having physical damage of any kind. Warrenty do not cover any 3. party
claims nor any compesation of disadvantage or cost related to missing or not working product. Any claim must be followed by decribtion
and reason. Further the original invoice must be enclosed.
Tecnical data
Produktion and distribution: Dancar Autosikring ApS Smedevaenget 20 DK 2640 Hedehusene www.dancar.dk
Power: 12 to 14 volt DC
Max load motor: 16 amp.
Fuse: 30 amp ATO fuse
Stand by consumption: 13 mA
Transm. freq.:
Weight: 5.6 kg.
Elfoot is a international trademark
Battery transm. Coin type 2450
2.4 Gh
Patent: PA 2014 00444
Working temperature: -10 til 50 celcius.
Production country EU: denmark
Warrenty: 2 year mecanical parts
Warranty: 5 year controlbox and transmitter.
Production inv.: RoHS og EMC direktiv.
!
Contents and informations in this document can be changed without any pre-warning. Updated instruction see: dancar.dk
All material are copyright to Dancar and must not be copy, used in full or part without written permission from Dancar.dk
Code Jumper
ON button
DOWN button
UP button
Led «A»
Led «B»
Led «C»
JKH8007GB/ 01.12.2017
