Kollmorgen Mounting
SERVO
STAR
®
SP3 Power Block
8
OUTLINE DIMENSIONS
2x
∅
10.0
[.39]
3 x 5.5
[.22]
36.5
[1.44]
15.5
[.61]
244.0
[9.61]
33.7
[1.33]
216.0
[8.50]
163.0
[6.42]
2.0
[.08]
256.0
[10.08]
88.4 [3.48]
HEA
T SINK
CP3 06
CP3 03
67.4 [2.65]
6.7
[.61]
CP310
99.0 [3.90]
MOUNTING PRACTICES
The Kollmorgen SERVO
STAR
series of electronic system components are designed for panel
assembly. This panel assembly is then mounted in a metallic enclosure. Enclosures are supplied
by the manufacturers of the final product and meet the environmental IP rating of the end
product. To ensure proper grounding (and to optimize EMC), the enclosure should have
continuous ground continuity maintained between all metal panels. This ground continuity is
intended to be both a safety ground and a high frequency ground. The units are mounted on a
back plane installed into the enclosure. Ideally, the back plane should be an unpainted metallic
surface to optimize electrical bonding of the frame and provide the lowest possible impedance
path to earth ground. These enclosures also provide added safety.
The SERVO
STAR
units should be mounted vertically for proper ventilation. These products are
designed for mounting in an electrical enclosure to protect them from physical and environmental
damage.
www.szcxi.com | From
：
KOLLMORGEN
