3
F
1
2
F
11
Max:970
360°
75
100
±90°
102
±180°
±120°
±180°
±90°
-90°
15°
±120°
!
STEP 5
Adjust the monitor
Caution: Please do not fully
reverse the monitor screen-to
prevent damage to the fixings.
To adjust the swivel function by 5*5 allen key(F) on position 1
To adjust the tilt function by 5*5 allen key(F) on position 2
Adjust the Rotation Arm
STEP 6
When the size of monitors is small and the distance between the two monitors is too large,
the arms can be rotated to adjust the distance between the two monitors.
Cable Management
1. Take off cable management and put cable
management back to cover cables once
finishing the management
Cable
2. Buckle the clips (11) after
organising the cables.
Cable
Specification
CAUTION
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children.
●
Make Sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, please contact a professional
installer for assistance.
●
The desk or mounting surface must be capable of supporting the combined weight of the mount and the display,otherwise the structure must be reinforced.
●
Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious inju ry or
death.
●
please check joint parts every two months, making sure the screws are nor loosened.
This product was designed to be installed on a desk. Before installing, make sure the mount will support the combined load of the equipment and
hardware. Never exceed the maximum load capacity 9 KG, or else it may result in product failure or personal injury.
Note:this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
Warning:
obsolete products can be sent back to the manufacturer or handed over to professional institutions.
To maintain the gas mechanism in peak performance - it is suggested to raise the monitor arm up to the maximum height: ideally twice per month.
This product contains high pressure gas spring parts, please do not put it into fire, high temperature, or disassemble it, which will lead to
personal injury. The
Factory setting: 5-7KG
To equalise the mount and
monitor's weight-please
