damian SNACK EUROPA, Установка и обслуживание

Страница: 28 / 43

Serie "EUR7"
Pagina A - 10
Rev. M - 01
Where
L (line) indicates the number of the drawer (from the bottom) and C (column) indicates the
position on the drawer.
Where
XX
indicates the price line S1 , S2 , S3 dedicated to direct selections and
VVVVV
the relative price.
Press the 1 and 2 keys to scroll through the available selections.
Press the
3
key to confirm the current selection;
Press the button of direct selection from associate, or press
1
or
2
to choose from;; choosing "L01", the
selection is no longer associated with any direct selection button.
Press
3
to confirm the change. Repeat the same procedure for all selections from associate.
>
P
RICE
A
SSOCIATION
:
This function allows associating a price of the „ A‟ price bracket and the respective „ B‟
bracket price to each
available selection.
Where L (line) indicates the number of the drawer (from the bottom) and C (column) indicates the position
on the drawer.
Where
XX
indicates the price line and
VVVVV
the relative price.
Press the 1 and 2 keys to scroll through the available selections.
Press the
3
key to vary the association with the selling price line for the current selection; scroll through
the price lines with the
1
and
2
keys, after having selected the desired one, confirm it with the
3
key.
>
D
ISPLAY OF THE SELLING PRICE
:
Enables the display of the selling price of the product requested by the customer at the time of the sale.
Settable values:
'Enabled‟ (ON displayed), „ Disabled‟
(OFF displayed).
[ Default: Enabled ]
EXECUTIVE PAYMENT SYSTEM PARAMETERS
(Visible and programmable only with „ Operating mode = Executive‟)
>
V
ALUE OF EACH STEP OR
C
OIN SCALING FACTOR
:
The value of the coins and the selling prices are always expressed as multiples of a base coin of minimum
value. During operation with Executive payment systems, this value must be the same as the one set in
the payment system. Settable values:
0 ÷ 1000 .
[ Default: 00001 ]
Note 1 : if, during entering of the selling prices and of the values of the various coins and banknotes, they
are not multiples of the “Value of each step” parameter, they will automatically be rounded off.
MDB PAYMENT SYSTEM PARAMETERS
(Visible and programmable only with „ Operating mode = MDB ‟ )
Some of these menus are only visible if a peripheral device is connected that foresees their use.
Programming
Price management
Price assoc.
->->->
Drawer : R-C
XX VVVVV
3
3
Programming
Price management
Enable Price Dsp
Current value
3
Programming
Price management
Min. coin value
Current value
3