background image

Care should always be exercised when handling and operating this product. Even 
though the system is encased within a rugged, industrial enclosure, incorrect use or 
handling can result in damage to your investment. To prevent this, you should avoid the 
following: 

Handling Precautions 

Hot-plugging cables and devices. Be sure to shut the system down and remove 
power before connecting or disconnecting anything to it. 

Free-standing operation. It is advisable to mount the system properly to prevent it 
from falling accidentally. Mounting hardware is provided with the system. 

Do not place hard or sharp objects directly on or against the touch screen. Avoid 
exposing the touch screen to direct sunlight for prolonged periods.   

Operating the system in an environment outside of it’s recommended operating 
conditions. 

Avoid the damage that ESD can cause. Never expose the internal electronics to a 
potentially hazardous environment by opening the enclosure. Doing so may cause 
serious damage. 

 

 

 

User Service Warning 
 

With the exception of the externally accessible CFAST solid state drive, this product has 
no field-replaceable component. Tampering with the unit will void the product warranty. 

Warranty 

Teledyne DALSA warrants the GV-312T against defects in materials and workmanship 
for a period of Twelve (12) months from the date of delivery. Teledyne DALSA and its 
representatives expressly disclaim any and all other warranties.  
 
Your sole remedy shall be repair or replacement of this product and associated optional 
components, provided that the defective product is returned within the warranty period. 
Teledyne DALSA assumes no liability for any damages, lost profits, lost savings or 
consequential damage resulting from the use, misuse of, or inability to use this product.  
 
If you need to return the product, you must contact the Teledyne DALSA representative 
who sold it to you. Do not return your product to Teledyne DALSA without prior 
authorization. 
 

Содержание Touch GEVA Series






























Отзывы: