20
The iDiscover utility is provided for discovering Genie cameras connected to the GV
312T camera port. Use the iDiscover interface to change the camera IP settings to
match the IP setting of the camera port. A shortcut to the iDiscover program is available
on the GV 312T desktop.
Click on one of the detected cameras to populate the associated network configuration
on the right. You can then modify the camera IP address to match the camera port IP
segment at the top. Click the “Apply” button to save changes.
Note
: Conflicting IP
addresses will be designated by a
red
camera icon in the detected camera menu.
Select cameras to use in your iNspect Express configuration by clicking and moving
them to the left panel using the arrow buttons. You can change the camera order by
using the up/down arrow buttons on the left control bar. Save the corrected camera list.
Note:
For Sherlock applications, iDiscover is only used to detect and correct IP
conflicts. Clicking the “Save Camera Set” has no effect in Sherlock.
The iDiscover Utility
Click to save
configuration
Click to return to
camera selector
