4M Stop Action Camera Manual
PRELIMINARY
51
5
Troubleshooting
The information in this chapter c
you solve problems that may occur during the
ember
era is part of the entire acquisition system.
ay have to troubleshoot any or all of the following:
es
cabling
host computer
operating environment
encoder
with a technical problem should be:
ns listed in sections 5.1, 5.2 and 5.3.
resolve your problem, see section 5.4 on getting product
5.1 Common Solutions
Con
at your camera has all the correct
connections.
Check for the presence of all voltages at the camera power connector. Verify the
connector pinout and that all grounds are connected. Refer to section 2.2.3 Power
Connector for details.
Note:
Avoid hot plugging long power cables into the camera.
Data Clocking/Output Signals
To validate cable integrity, have the camera send out a test pattern and verify it is being
properly received. Refer to section 3.8 for further information on running test patterns.
an help
setup of your camera. Rem
You m
that the cam
power suppli
frame grabber hardware &
software
light sources
optics
Your steps in dealing
1. Try the general and specific solutio
2. If these solutions do not
support.
nections
The first step in troubleshooting is to verify th
Power Supply Voltages
DALSA 03-32-10121-09
