Dalsa Spyder2 S2-2x-04K40 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 78

background image

59

Spyder2 4k User’s Manual

03-032-10195-04

DALSA

Changing Network ID of a Camera

To change the ID of a networked camera, even if some or all of the cameras share the
same camera ID, provide the serial number of the camera as the second parameter when
sending the broadcast version of the

sci

command.

Example: change network ID of camera with serial number abcd to 1

: sci 1 abcd

Note: each camera must be polled following use of a broadcast command.

The Network Commands

The network command is an ordinary camera command prefixed by a network prefix.
Network prefixes always start with the colon character "

:

" and are followed immediately

by the camera ID (addressing a single camera on the network), or space (addressing all
cameras on the network or a Broadcast command).

The camera replies to the network command only if it is addressed directly. The last line
of the camera reply (error or OK message) to the network command is prefixed with the
ID of the camera.

Example: return camera ID for camera a

:a gci

camera id: a

a OK>

Special Case: Empty Network Command

The empty network command is a special case of network commands. If the last
command issued was not a Broadcast command, the empty network command will cause
the addressed camera to output an "OK" message followed by the ">" prompt and
prefixed by the network ID. If the last command issued was a broadcast command, the
empty network command is used to query each camera for its READY/BUSY status.

Example: empty network command issued

:a CR

a OK>

Broadcast Commands and READY/BUSY Status

Broadcast commands are commands sent to all cameras on the network at the same time.
After a broadcast command is sent, and before issuing the next command,

each

camera on

the link must be polled until a READY status is returned. A BUSY status indicates that the
camera is not ready to receive the next command.

«
...
57
58
59
60
61
...
»

Содержание Spyder2 S2-2x-04K40















































































Отзывы:

Нет отзывов

Похожие инструкции для Spyder2 S2-2x-04K40

Бренд: Campbell Страницы: 116

Бренд: Paradox Страницы: 2

Бренд: Paradox Страницы: 2

Digiplex EVO DGP2-640

Бренд: Paradox Страницы: 24

Бренд: TELETECH Страницы: 4

Бренд: Velleman Страницы: 22

Бренд: i3 International Страницы: 3

STAR-LIGHT Universal HD over Coax DWC-D3263TIR

Бренд: Digital Watchdog Страницы: 36

Бренд: Idis Страницы: 51

Бренд: Velleman Страницы: 20

Бренд: Eaton Страницы: 36

STI-6400 Exit Stopper

Бренд: Safety Technology International Страницы: 7

Бренд: SVBONY Страницы: 41

Бренд: urmet domus Страницы: 8

Бренд: Esse-ti Страницы: 44

Бренд: FLIR Страницы: 2

Бренд: DW Страницы: 80

Бренд: Idis Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды