Piranha HN RoHS User Manual
03-032-20135-00
Teledyne DALSA
58
Mnemonic
Syntax Parameters
Description
restore factory settings
rfs
Restore the camera’s factory settings. FPN and PRNU
coefficients reset to 0.
region of interest
roi
x1 y1 x2 y2
Sets the pixel range affected by the
ccg
,
gl
,
gla
,
ccf
,
cpa
and
ccp
commands. The parameters are the pixel
start and end values (
x1
and
x2
) and the column start
and end values (
y1
and
y2
) in a range from
1
to
8192
.
reset pixel coeffs
rpc
Reset the pixel coefficients to 0.
restore user settings
rus
Restore the camera's last saved user settings.
set addition background
sab
i
Subtract the input value from the output signal.
i
= Added value in a range from
0
to
4096
.
set analog binning horizontal
sbh
m
Sets the horizontal binning value. Available values are
1
,
2
,
4
.
set analog binning vertical
sbv
m
Sets the vertical binning value. Available values are
1,
2, 4
.
set ccd direction
scd
i
Sets the CCD shift direction where:
0 =
Forward TDI shift direction.
1 =
Reverse TDI shift direction.
2 =
Externally controlled direction control via Camera
Link control CC3. Available only in TDI Mode
set digital binning horizontal
sdh
m
Sets the horizontal binning value. Available values are
1
,
2
,
4
.
set digital binning vertical
sdv
m
Sets the vertical binning value. Available values are
1,
2, 4
.
set exposure mode
sem
m
Set the exposure mode:
3 =
External SYNC, maximum exposure time
7 =
Internal programmable SYNC, maximum
exposure time. Factory setting.
set fpn coeff
sfc
x i
Set the FPN coefficient.
x
=pixel number within the range
1
to 8192.
i
= FPN value within the range
0
to
8191
(12-bit LSB).
set gain
sg
f
In a range -20 to +20 DN.
set mirror mode
smm
i
Set the camera’s mirror mode:
0
: Pixels readout left to right (1 to 4096 or 8192)
1
: Pixels readout right to left (8092 or 4096 to 1)
set output throughput
sot
m
This command works in conjunction with the
clm
command and determines the Camera Link strobe rate.
80
=
4 taps at 20MHz or 2 taps at 40MHz
160
=
2 taps at 80MHz or 4 taps at 40MHz
320
=
4 taps at 80MHz or 8 taps at 40MHz
640
=
8 taps at 80MHz
set prnu coeff
spc
x i
Set the PRNU coefficient.
x
=pixel number within the range
1
to 8192.
i
= PRNU value within the range
0
to
61438
.
set prnu range
spr
x1 x2 i
Set a range of pixel PRNU coefficients
x1
=first pixel number of the range 1 to 8192.
x2
=last pixel number of the range 1 to 8192.
i
=coefficient value in a range from
0
to 61438.
