Dalsa P4-CC-08K03T-01-R страница 32 Скачать руководство пользователя | Manualshive

Страница: 32 / 95

background image

32

Piranha4 8k Color Camera User's Manual

03-032-20274-00

Teledyne DALSA

Trigger Modes

The camera’s image exposures are initiated by a trigger event. The trigger event is either a
programmable internal signal used in free running mode, an external input used for
synchronizing exposures to external triggers, or a programmed function call message by the
controlling computer. These triggering modes are described below.



Internal trigger (trigger disabled):

The camera free-running mode has a

programmable internal timer for line rate and a programmable exposure period.



External trigger (trigger enabled):

Exposures are controlled by an external

trigger signal. The external trigger signal is the Camera Link control line CC1.

Exposure Controls

Exposure Control modes define the method and timing of how to control the sensor
integration period. The integration period is the amount of time the sensor is exposed to
incoming light before the video frame data is transmitted to the controlling computer.



Exposure control is defined as the start of exposure and exposure duration.



The start of exposure can be an internal timer signal (free-running mode) or an
external trigger signal.



The exposure duration can be programmable (such as the case of an internal timer)
or maximum. In the latter case, the camera will maximize the exposure duration for
the programmed line rate.

The camera can grab images in one of three ways. You determine the three imaging modes
using a combination of the Exposure Mode parameters (including I/O parameters), Exposure
Time and Line Rate parameters.

Description

Line Rate

Exposure Time

Trigger Source

(Sync)

Internal line rate and exposure time

Internal, programmable

Internal programmable

Internal

Internal line rate and max exposure

Internal, programmable

maximum

Internal

External line rate (EXSYNC) and
exposure time

Controlled by EXSYNC
pulse

Internal programmable

External

External line rate (EXSYNC) and max
exposure time

Controlled by EXSYNC
pulse

maximum

External

Figure 16. Exposure controls

The parameters used to select the imaging modes—trigger sources (sync), exposure time,
and line rate—are grouped together as the Camera Controls.

Camera Controls

Parameter

Description

Line Rate (in Hz)

Camera line rate in Hz. Only available when the start line trigger parameter is disabled
(Trigger Mode off).

Exposure Mode

Set the operation mode for the camera’s exposure.

Timed or Maximum.

«
...
30
31
32
33
34
...
»

Содержание P4-CC-08K03T-01-R
































































































Отзывы:

Нет отзывов

Похожие инструкции для P4-CC-08K03T-01-R

Бренд: D-Link Страницы: 2

Бренд: Harbor Freight Tools Страницы: 3

Бренд: Yada Страницы: 20

Бренд: chinavasion Страницы: 2

Бренд: Ultrak Страницы: 36

Бренд: ZENEC Страницы: 2

Бренд: Uniden Страницы: 20

Бренд: RDS Страницы: 46

Бренд: Sigma Страницы: 1

Бренд: Philips Страницы: 6

Бренд: Philips Страницы: 23

Бренд: VIOTRAN Страницы: 41

Schneider D-XENOGON 35

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 2

Samsung 18-55mm

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

20-50mm F3.5-5.6 ED II

Бренд: Samsung Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды