Dalsa Genie Nano-CXP Series Скачать руководство пользователя страница 19

Страница: 19 / 107

Genie Nano-CXP Series™

Nano-CXP Installation

•

Nano-CXP Installation

If you are familiar with CoaXPress cameras and Teledyne DALSA frame grabbers, follow these steps

to quickly install and acquire images with Genie Nano-CXP and the CamExpert tool provided with

Sapera LT in a Windows OS system.

Quick Start (using a Teledyne DALSA Frame Grabber)

•

Install Sapera 8.41 (or later). Use the Full SDK version with support for Teledyne DALSA frame

grabber boards.

•

Install the Teledyne DALSA CoaXPress frame grabber board along with its driver.

•

Start CamExpert. The plug-and-play feature of CXP frame grabber and camera will

automatically configure frame buffer, data lanes, and frame rate parameters to match the

Nano-CXP model being used. At this time do not configure for an external trigger.

•

Connect the Nano-CXP with 4 camera cables. The Teledyne DALSA CXP frame grabber supports

PoCXP (power over CoaXPress) for a simple camera power solution.

•

Enable PoCXP by its frame grabber feature. If not using PoCXP connect a power supply to the

Nano-CXP via its

I/O connector

•

When the Nano-CXP boots, CamExpert will read and display the camera features available with

that model.

•

The Nano-CXP status LED has changed to flashing green, indicating it is in free running

acquisition mode. See

LED States

on Power Up for all status LED conditions.

•

From the Nano-CXP Image Format Feature Category, select the Moving Grey Diagonal Ramp

test pattern from the Test Image Selector Parameter.

•

Click grab. You will see the moving pattern in the CamExpert display window.

•

If a camera lens is attached, turn off the test pattern and grab live again. Adjust the lens

aperture plus Focus, and/or adjust the Nano

Exposure Time and frame rate

as required.

General Installation Overview

Connecting a Nano-CXP to a frame grabber is similar whether using a Teledyne DALSA frame

grabber board with Sapera LT SDK or a third party frame grabber with its own SDK.

Camera Firmware Updates

Under Windows, the user can upload new firmware, using the

File Access Control

features provided

by the Sapera CamExpert tool.
Download the latest firmware version released for any Nano-CL model from the Teledyne DALSA

support web page:

http://www.teledynedalsa.com/imaging/support/downloads/firmware/

Содержание Genie Nano-CXP Series












































































































Результаты поиска

Содержание Genie Nano-CXP Series

Отзывы:

Похожие инструкции для Genie Nano-CXP Series

Бренды по названию

Популярные бренды

Dalsa Genie Nano-CXP Series, Руководство пользователя

Результаты поиска

Содержание Genie Nano-CXP Series

Отзывы:

Похожие инструкции для Genie Nano-CXP Series

Бренды по названию

Популярные бренды