Dalsa Genie Nano-CXP Series, Руководство пользователя

Страница: 11 / 107

Genie Nano-CXP Series™ Nano-CXP Specifications
•
9
Nano-CXP Specifications
The Nano-CXP common specifications listed first are followed by model specific tables of functional
features and timing details.
Common Specifications
Cam era Controls
Communication Protocol GenCP over CoaXPress (GenICam GenCP compliant software)
Synchronization Modes Free running, External triggered
Exposure Control Internal – Programmable via the camera API
External – Timed Trigger or Trigger Width modes supported
Exposure Time Maximum 10 sec
Exposure Modes Programmable in increments of 1µs
minimum time (in µs) is model specific
Pulse controlled via external Trigger pulse width.
Features
Reserved Private User Buffer 4 kB flash memory for OEM usage (deviceUserBuffer)
Flash memory 32 MB flash memory
Gain In Sensor gain
Defective Pixel Replacement Up to 4096 entries
Counter and Timer 1 Counter and 1 Timer. User programmable, acquisition independent, with event
generation, and can control Output I/O pins
Test image Internal generator with choice of static and shifting patterns
User settings Select factory default or either of two user saved camera configurations
CoaXPress Link Speed 6.25 Gb/s - 4 Data Lanes
Back Focal Distance
12 mm (M42 mount)
Mechanical Interface
Camera (L x H x W)
see Mechanical Specifications
XL Case:
38.3 mm x 59 mm x 59 mm
Mass XL Case: ~ 163g
CoaXPress Connector Type DIN 1.0/2.3 connector (CXP-6 maximum speed rating)
Power connector Camera power via PoCXP or by the power pins on the 10-pin I/O connector
Electrical Interface
Input Voltage +24V nominal (+12 to +26 Volts DC maximum range)
Supports the Power Over CXP standard (PoCXP)
Power Dissipation (typical) 12W @ 24Vdc aux. (for the XL case)
Environm ental Conditions