Dalsa Genie Nano-5G Series, Руководство пользователя, Страница: 79 / 204

Nano-5G Series GigE Vision Camera Operational Reference • 77
Timer Selector
timerSelector Selects which timer to configure.
1.00
Expert
DFNC
Timer 1 Timer1 Timer 1 selected
Timer Mode timerMode Select the Timer mode. The selected Timer is Active
or Disabled. When Disabled, the Timer can be
configured.
1.00
Expert
DFNC
Off Off The selected Timer is Disabled.
Active Active The selected Timer is Enabled.
Timer Status timerStatus Returns the current state of the timer.
1.00
Expert
DFNC
Timer Idle TimerIdle The timer is idle. The CounterStartSource feature is
set to off.
Timer Trigger Wait TimerTriggerWait The timer is waiting for a start trigger.
Timer Active TimerActive The timer is counting for the specified duration.
Timer Completed TimerCompleted The timer reached the TimerDuration count.
Timer Start Source timerStartSource Select the trigger source to start the timer. The Event
Control section provides details and timing diagrams
for the supported events.
1.00
Expert
DFNC
TimerReset Cmd Off Starts with the reception of the TimerReset
Icommand.
Acquisition Start AcquisitionStart Start Timer on Acquisition Start event.
Acquisition End AcquisitionEnd Start Timer on Acquisition End event
Exposure Start ExposureStart Start Timer on Exposure Start event.
Exposure End ExposureEnd Start Timer on Exposure End event.
Readout Start ReadoutEnd Start Timer on Readout Start event.
Readout End ReadoutStart Start Timer on Readout End event.
Frame Start FrameStart Start Timer on Frame Start event.
Frame Trigger ValidFrameTrigger Start Timer on Frame Trigger event.
Frame Burst End FrameBurstEnd Start Timer on Frame Burst End event.
Action 1 Action1 GigEVision Action Command 1. This is a broadcast
command that multiple devices can respond to
simultaneously.
Action 2 Action2 GigEVision Action Command 2. This is a broadcast
command that multiple devices can respond to
simultaneously.
Line 1 Line1 Start Timer on a transition of I/O Line 1 event.
See Input Signals Electrical Specifications.
Line 2 Line2 Start Timer on a transition of I/O Line 2 event.
Timer 1 End Timer1End Start Timer on Timer End event.
Counter 1 End Counter1End Start Timer on Counter 1 End event.
Timer Line Activation timerStartLineActivation Select the trigger activation mode which starts the
timer.
1.00
Expert
DFNC
Rising Edge RisingEdge Starts counter on rising edge of the selected signal.
Falling Edge FallingEdge Starts counter on falling edge of the selected signal.
Any Edge AnyEdge Starts counter on the falling or rising edge of the
selected signal.
Timer Duration timerDuration Sets the duration (in microseconds) of the timer
pulse.
1.00
Expert
DFNC
Timer Value timerValue Reads the current value (in microseconds) of the
selected timer.
1.00
Expert
DFNC
Timer Reset timerReset Resets the timer to 0 while timerStatus=TimerActive .
Timer then waits for the next timerStartSource event.
1.00
Expert
DFNC