Dalsa Genie Nano-5G Series Скачать руководство пользователя страница 41

Страница: 41 / 204

Nano-5G Series GigE Vision Camera

Using Nano-5G with Sapera API

•

Installation

Note:

to install Sapera LT and the GigE Vision package, logon to the workstation as an administrator or

with an account that has administrator privileges.

When Genie Nano-5G is used in a

Sapera development environment

Sapera LT 8.10 (or

later)

needs to be installed, which automatically provides all GigE Vision camera support including

TurboDrive.
If no Sapera development is required. Then the Sapera LT SDK is not needed to control the
Linea GigE camera. Sapera runtime with CamExpert provides everything to control the camera.

Procedure

•

Download and install Sapera LT 8.10 (or later) which automatically provides GigE Vision support

with Teledyne DALSA TurboDrive™ technology

. Note that Nano-5G features may change when

an older versions of Sapera LT is used.

•

Optional: If the Teledyne DALSA Sapera LT SDK package is not used, click to install the Genie

Nano-5G firmware and user manuals only. Follow the on screen prompts.

•

Connect the camera to an available free Gigabit NIC

that’s

not part of some other corporate

network.

Refer to Sapera LT User’s Manual concerning application development with Sapera.

Note

: The Teledyne DALSA Sapera CamExpert tool (used throughout this manual to describe Genie Nano-

5G features) is installed with either the Sapera LT runtime or the Sapera LT development package.

Camera Firmware Updates

Under Windows, the user can upload new firmware, using the

File Access Control

features provided

by the Sapera CamExpert tool.

Important:

Download the latest firmware version released for any Nano-5G model from the

Teledyne DALSA support web page:

http://www.teledynedalsa.com/imaging/support/downloads/firmware/

Firmware via Linux or Third Party Tools

Consult your third party GigE Vision software package for file uploads to the connected device.

Содержание Genie Nano-5G Series













































































































































































































Результаты поиска

Содержание Genie Nano-5G Series

Отзывы:

Dalsa Genie Nano-5G Series, Руководство пользователя, Страница: 41 / 204

Результаты поиска

Содержание Genie Nano-5G Series

Отзывы: