Dalsa Genie Nano-5G Series, Руководство пользователя, Страница: 78 / 204

76 • Contents Nano-5G Series GigE Vision Camera
Line 1 Line1 Counts the number of transitions on Line 1 (based on
the counterIncrementalLineActivation feature setting)
See Input Signals Electrical Specifications.
Line 2 Line2 Counts the number of transitions on Line 2 (based on
the counterIncrementalLineActivation feature setting)
Internal Clock InternalClock The counter increments on each microsecond tick of
the device internal Clock.
Timer 1 End Timer1End Counts the number of Timer 1 End events.
Counter Incremental Line
Activation
counterIncrementalLineActivation
Selects the counter signal activation mode. The
counter increments on the specified signal edge or
level.
1.00
Expert
DFNC
Rising Edge RisingEdge Increment the counter on the rising edge of the
selected I/O Line.
Falling Edge FallingEdge Increment the counter on the falling edge of the
selected I/O Line.
Any Edge AnyEdge Increment the counter on the falling or rising edge of
the selected I/O Line.
Counter Reset Source counterResetSource
Selects the signal source to reset the counter. After a
reset the counter waits for the next countStartSource
signal or event.
1.00
Expert
DFNC
Reset Cmd Off Reset on reception of the Reset Icommand.
Acquisition Start AcquisitionStart Reset on reception of the Acquisition Start.
Acquisition End AcquisitionEnd Reset on reception of the AcquisitionEnd
Exposure Start ExposureStart Reset on reception of the Exposure Start event.
Exposure End ExposureEnd Reset on reception of the Exposure End event.
Readout Start ReadoutStart Reset the counter on the reception of the Readout
Start event.
Readout End ReadoutEnd Reset the counter on the reception of the Readout
End event.
Frame Trigger FrameStart Reset on reception of the Frame Trigger.
Valid Frame Trigger ValidFrameTrigger Reset on reception of the Valid Frame Trigger.
Rejected Frame Trigger InvalidFrameTrigger Reset on reception of the Invalid Frame Trigger.
MultiFrame End Trigger FrameBurstEnd Reset on reception of the Frame Burst end.
Line 1 Line1 Reset counter on the specified transition on line 1.
See Input Signals Electrical Specifications.
Line 2 Line2 Reset counter on the specified transition on line 2.
Timer 1 End Timer1End Reset on reception of the Timer End.
Counter 1 End Counter1End Reset on the reception of the Counter end.
Counter Reset Input Line
Activation counterResetLineActivation Specify the edge transition on the selected line that
will reset the selected counter.
1.00
Expert
DFNC
Rising Edge RisingEdge Reset counter on rising edge of the selected signal.
Falling Edge FallingEdge Reset counter on falling edge of the selected signal.
Any Edge AnyEdge Reset counter on the falling or rising edge of the
selected signal
Counter Duration counterDuration Sets the duration (or number of events) before the
CounterEnd event is generated.
1.00
Expert
DFNC
Counter Value counterValue Read the current value of the selected counter.
1.00
Expert
DFNC
Counter Value At Reset counterValueAtReset Stores the counter value of the selected counter when
it was reset by a trigger or by an explicit Counter
Reset command.
1.00
Expert
DFNC
Counter Reset counterReset Resets the selected counter to zero. The counter
starts immediately after the reset. To temporarily
disable the counter, set the Counter Event Source
feature to Off.
1.00
Expert
DFNC