Dalsa Genie Color C1280, Руководство пользователя

Страница: 44 / 133

42

Operational Reference Genie Color Series-GigE Vision Camera
Window ROI Control via Sapera LT or GigE Vision Compliant
Applications
Sapera
Genie Sapera parameters for Partial Scan and Window ROI:
Width = Buffer width in pixels (must be an even value)
Height = Buffer height in lines
OffsetX = Horizontal Offset of the leftmost pixel relative to the sensor
(must be an even value only)
OffsetY = Vertical offset in lines, of the uppermost pixel relative to the sensor
(must be an even value only)
PixelFormat = {Bayer Raw8 / Bayer Raw10 / RGB 32-bit / UYVY / YUY2}
See " Accessing Features with + LT " on page 73 .
XML features for Partial Scan and Window ROI:
Width = Width of image region of interest (must be an even value)
Height = Height of image region of interest
OffsetX = Left coordinate of region of interest (must be an even value)
OffsetY = Top coordinate of region of interest
LinePitch = Distance between consecutive lines in bytes
PixelFormat = Format of the image pixels as per SFNC specification
PixelCoding = Feature indicates the coding of the image pixels. Raw data is the native format of
the sensor.
PixelDynamicRangeMin = Minimum pixel value sent by camera
PixelDynamicRangeMax = Maximum pixel value sent by camera
CamExpert Image Buffer and ROI Parameters
CamExpert provides controls to configure acquisitions via the Image Buffer and ROI Parameters tab. The image
buffer can be easily cropped as desired. Below is the CamExpert dialog and parameter descriptions follow.