Dalsa CALIBIR 640 GigE, Руководство пользователя

Страница: 77 / 105

Calibir 640 GigE IR Camera User's Manual Operational Reference • 77
GigE Vision Host Control Category
The GigE Vision Host controls, as shown by CamExpert, groups parameters used to configure the
host computer system GigE Vision features used for Calibir networking management. None of these
parameters are stored in any Calibir camera.
These features allow optimizing the network configuration for maximum Calibir bandwidth. Settings
for these parameters are highly dependent on the number of cameras connected to a NIC, the data
rate of each camera and the trigger modes used.
Information on these features is found in the Teledyne DALSA Network Imaging Module User
manual.
File Access Control Category
The File Access control in CamExpert allows the user to quickly upload various data files to the
connected Calibir GigE. The supported data files are for firmware updates, etc.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or
third party software usage—not typically needed by end user applications.
Figure 40: CamExpert File Access Control Category