VSC-1
www.dallmeier.com
26
7.1.3
Functions
PTZ cameras have a rule of functions for defining and storing positions and attitudes. The
definition of these preadjustments is done via the camera menu. The triggering of the de-
fault settings can be performed easily and quickly with the VSC-1.
Refer to the documentation of the corresponding camera in relation to the definition of the
preadjustments.
7.1.3.1
Preset
A preset stores the position and the focus of the camera. After activation of this preadjust-
ment, the camera moves toward automatically to the stored position.
Select the relevant camera.
Enter the number of the preset via the numeric pad.
Press the
PSET
button.
In contrast to the following features a preset can be defiend with the VSC-1.
Move the camera to the relevant postiton.
Press the
PSET
button for about 5 seconds.
7.1.3.2
Tour
A tour saves a combination of different presets, pattern (see below) and other tours. After
activation of this preadjustment, the camera moves toward automatically to the saved posi-
tions.
Select the relevant camera.
Enter the number of the tour via the numeric pad.
Press the
TOUR
button.
7.1.3.3
Pattern
A pattern stores a sequence of commands (pan, tilt, zoom), which are given to the camera.
After activation of this preadjustment, the camera automatically moves the saved “way” off.
Select the relevant camera.
Enter the number of the pattern via the numeric pad.
Press the
PATT
button.