VSC-1
www.dallmeier.com
18
Plug connector
Fig. 5-6 DNI front view
For detailed information refer to the DNI-1 documentation “Installation and Configuration”.
5.1.3
DNI and Dome Camera
Use a two-wire line to connect the second DNI interface and the dome camera.
Rx+
(Dome) to data input A
TxD+
(DNI)
Rx-
(Dome) to data input B
TxD-
(DNI)
Set the ID number at the camera.
NOTICE
Potential malfunction of automatic camera switching!
The camera’s ID number must correspond to the respective video input on
the recorder.
Set the relevant protocol (Pelco-P) at the camera.
For detailed information refer to the documentation “Installation and Configuration” of the
respective camera manual.
5.1.4
Connection DNI and Recorder
Connect the DNI master to the recoder’s serial interface using a serial cable (RS232 with
1:1 assignment).
Fig. 5-7