dallmeier Panomera S7, Пусконаладка

Страница: 13 / 44

www.dallmeier.com 13
Commissioning
S5-S8
6.2 Power Supply
The device can be supplied with 48 V DC or 24 V AC (power supply unit optionally available).
Note that the camera and the built-in heater must each be supplied with 48 V DC or 24 V AC (always observe the product rating plate).
WARNING
Electric shock hazard
Danger of death or serious injury
➡
Always disconnect the power supply unit from the mains socket (pull out the power plug) before connecting or discon -
necting the device.
Over-voltage (electrical surge)
Danger of death or serious injury as well as damage to the device
➡
To ensure the safety of persons (protection against dangerous contact voltages) and to prevent damage to the device
caused by electrical surge, a standard-compliant earthing of the device is mandatory.
NOTICE
Damage to the device resulting from improper power supply
➡
Always ensure the correct polarity when using a 48 V DC power supply unit.
Electrical Data
Voltage supply Camera: 48 V DC / 24 V AC
Heater: 48 V DC / 24 V AC
Power consumption Camera: Max. 60 W (depending on the model, see respective product data sheet)
Heater: Max. 60 W
Connection Hirschmann CA 3 GS (mating connector: Hirschmann CA 3 LD)