dallmeier Mountera Box with PSU, Пусконаладка

Страница: 19 / 64

19
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
The Mountera® Box can be mounted directly on a ceiling or a wall
or – in combination with an adapter – on a pole.
In the following, the mounting of the Mountera® Box on a wall using
the supplied mounting screws/anchors is illustrated as well as its
preparation for wiring Panomera® systems that are equipped with the
Mountera® Quick-Lock System.
Required Tools/Accessories
The following tools/accessories are required for mounting the Mountera® Box
directly on a ceiling or a wall and for wiring the required cables:
•
Drilling template (included in the delivery) with markings for the
required drill holes (⌀ 8 mm)
•
Tool (e.g. center punch or awl) for marking the drill hole locations
through the drilling template
•
Drilling machine with drill bit (nominal drill bit diameter: 8 mm;
type of drill bit suitable for the respective construction material)
•
Foam pad with self-adhesive backing (included in the delivery)
•
Hexagon socket screw key (size 5; included in the delivery)
•
Hexagon socket screw key (size 2.5; included in the delivery)
•
4 mounting screws/anchors (e.g. plastic frame anchor with hexagon
head screw + pressed-on washer; anchor diameter: 8 mm, anchor length:
100 mm; included in the delivery)
•
Rubber mallet
•
Ratcheting wrench handle with extension and 6-point socket
(drive style: external hex, size: 10 mm)
•
Mountera® Cable Set C (optionally available)
•
Insulated cable lugs (crimp terminals) for used earthing/grounding cable
•
Crimping tool for used cable lugs
•
Small slotted screwdriver or similar tool for lifting the strain relief clamp
out of the “Power In” cable strain relief plate