dallmeier Mountera Box with PSU, Пусконаладка

Страница: 13 / 64

13
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
Warranty
The terms and conditions valid at the time the contract was signed shall
apply.
Appropriate Use
Mountera® Box with PSU
The Mountera® Box with PSU is a junction box designed for mounting,
wiring and powering Panomera® systems and cameras that are equipped
with the Mountera® Quick-Lock System.
The junction box can be operated with a mains voltage of 100 – 240 V AC
(±10%) at a mains frequency of 50 – 60 Hz (±6%).
The built-in power supply unit provides a total output power of up to
260 watts and enables the simultaneous power supply of several suitable
Panomera® systems or cameras with 48 V DC each.
Made of robust aluminum and equipped with durable seals, the IP66-rated
junction box is suitable for 24/7/365 continuous operation both indoors and
outdoors.
The chromated surface of the junction box is finished with powder coating
in signal white (RAL 9003) which has been tested for seawater resistance
according to DIN EN 60068-2.
The Mountera® Box with PSU can be mounted directly on a ceiling or a wall
or – in combination with an adapter – on a pole.
The optionally available Mountera® brackets with Quick-Lock System and
internal cable routing enable quick and easy installation of the correspond-
ing Panomera® systems or cameras on the junction box without visible
cables.
Mountera® Box with SRS Edge
The Mountera® Box with SRS Edge combines the features of the
Mountera® Box with PSU with a SMAVIA Recording Server Appliance.
The fanless and energy-efficient server hardware offers passive cooling and
allows decentralized recording of high-resolution video streams on the
built-in SSD memory directly at the installation site.