Daktronics SPORTSOUND SSR-200 GEN II, Руководство по эксплуатации

Страница: 11 / 40

SSR-200 Components
7
Single-Muff Headset
The professional single-muff headset ( Figure 12 ) may be used in
place of the standard announcer’s interface wired microphone and
headphones. Other features include:
• Ambient noise attenuation
• Neodymium magnet system for high reproduction precision
• Soft, circumaural ear pad
• Cardioid condenser microphone
USB Audio Interface
The Radial
®
Engineering USB-Pro™ ( Figure 13 ) provides an interface
from laptop computers to balanced outputs. Other features include:
• 24-bit, 96 kHz quality audio
• Two balanced XLR outputs (left and right)
• 3.5mm TRS headphone output
• Ground lift and mono-sum switches
Self-Powered Monitor Speaker
The Yamaha MSP3 monitor speaker ( Figure 14 ) features a compact
bass reflex cabinet, with a 3.94" (100 mm) two-way cone speaker
and a 0.87" (22 mm) dome speaker. Other features include:
• Three inputs: one 1/4" phone, one RCA, one XLR
• Tone control (High/Low)
Signal Cables
Cable specifications are as follows:
• 5' (1.5 m) XLR cable for auxiliary audio input (part # W-1627)
• 15' (4.6 m) XLR cable between announcer’s interface and rack
(part # W-2074)
• 25' (7.6 m) XLR cable from rack to fiber box or wall plate (part # W-1560)
Notes:
• Keep unbalanced cable lengths under 6' (1.8 m) to prevent unwanted noise from being
picked up. Use appropriate converters, such as the LTIBLOX Laptop Interface, to convert to
balanced cables ( Figure 15 ) for longer cable runs if necessary.
• Run audio cables away from power cables to prevent noise.
• Audio cables must be kept separate from current loop (scoreboard control) signal cables.
Figure 15: Balanced/Unbalanced Cable Comparisons
Figure 12: Single-
Muff Headset
Figure 13: USB
Audio Interface
Figure 14: Self-
Powered Speaker