Daktronics SPORTSOUND 500HD, Руководство по установке

Страница: 48 / 58

.105 THICK
[2,667]
ENCLOSURE FLANGE
35.941
[912,901]
C-C
REV DATE: BY:
01 22 DEC 15 PER EC-22871; ADDED LUBRICANT WARNING
PJS
18704
REV DATE: BY:
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING
ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY
ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF
DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES.
COPYRIGHT 2016 DAKTRONICS, INC. (USA)
THIRD ANGLE PROJECTION
PROJECT:
DAKTRONICS AUDIO
TITLE:
MTG DETAIL; 500HD CTRL ENCL BEAM CLAMP
DATE:
22-DEC-15
DIM UNITS:
INCHES [MILLIMETERS]
SHEET REV
SCALE:
1/10 DO NOT SCALE DRAWING 1 OF 1 01
DESIGN:
KSCHNABEL
JOB NO. FUNC - TYPE - SIZE
1131068
DRAWN:
KSCHNABEL P1561 F - 10 - B
STRUCTURAL NOTES:
ALLOWABLE LOADS PER CONNECTION:
CONTROL ENCLOSURE WEIGHT W/ MOUNTING HARDWARE: 145 LBS
BOLT TORQUE: 50 FT-LB
MIN-MAX I-BEAM FLANGE THICKNESS: .1875" - 0.75"
MOUNTING INSTRUCTIONS:
1. ATTACH UNISTRUT TO CONTROL ENCLOSURE THROUGH EXISTING HOLES IN REAR FLANGES OF CONTROL ENCLOSURE AS
SHOWN IN UNISTRUT ATTACHMENT SIDE VIEW
2. PLACE SPRING NUTS INTO UNISTRUT
3. LIFT CONTROL ENCLOSURE INTO POSITION
4. ATTACH I-BEAM CLAMPS WITH 1/2" HARDWARE AS SHOWN IN TOP AND REAR ISOMETRIC VIEW CONTROL ENCLOSURE ATTACHMENT
5. MAKE SURE THE 1/2-13 BOLTS ARE AS CLOSE TO THE I-BEAM FLANGES AS POSSIBLE
6. WHEN CONTROL ENCLOSURE IS ADJUSTED TO FINAL DESIRED POSITION, TIGHTEN BOLTS FIRMLY
NOTE:
CONTROL ENCLOSURE MUST BE MOUNTED WITHIN 50' OF THE 500HD SOUND SYSTEM FOR SIGNAL CABLE TO REACH.
REFERENCE PACKET: 0A-1561-0049
***CRITICAL***
DO NOT USE ANY LUBRICANT
ON ANY MOUNTING HARDWARE
OR WARRANTY WILL BE VOIDED
TOP VIEW
CTRL ENCL ATTACHMENT
SCALE 1/6
BACK OF CONTROL
ENCLOSURE
I-BEAM CLAMP @4
SPRING NUT @4
1/2" FLAT WASHER @4
1/2" SPLIT LOCK WASHER @4
1/2 - 13 X 3.00 BOLT @4
VERTICAL I-BEAM
EXPLODED REAR ISOMETRIC VIEW
I-BEAM ATTACHMENT
I-BEAM CLAMP @4
SPRING NUT @4
***CRITICAL***
ENSURE SPRING NUT IS TURNED
TO VERTICAL POSITION INSIDE
UNISTRUT CHANNEL
1/2" FLAT WASHER @4
1/2" SPLIT LOCK WASHER @4
1/2 - 13 X 3.00 BOLT @4
5/16" FLAT WASHER @8
5/16 - 18 X 1.000 BOLT @4
5/16" SPLIT LOCK WASHER @4
5/16 - 18 NUT @4
1-5/8" UNISTRUT @4
USE EXISTING HOLES IN ENCLOSURE
EXPLODED SIDE VIEW
UNISTRUT ATTACHMENT
1X1X1/8" THICK WASHER PLATE @4
IT IS CRITICAL THAT WASHER PLATE
IS INSERTED IN THIS LOCATION.
TYP. ALL 4 HARDWARE CONNECTIONS.
PPaarrtt ## -- D DW WG G--0011113311006688 VVeerrssiioonn -- 0011..11 D Deessccrriippttiioonn -- N N BB M MTTG G D DEETTAAIILL;; 550000H HD D C CR RTTLL EEN NC CLL BBEEAAM M C CLLAAM MPP LLiiffeeccyyccllee SSttaattee -- IInn W Woorrkk LLaasstt M Mooddiiffiieedd BByy -- ppsscchhrrooee LLaasstt M Mooddiiffiieedd -- 22001155--1122--2222