Daktronics Fuelight FL-4000 Series, Руководство по установке и эксплуатации

Страница: 23 / 41

Control Options 17
FLD-2000 Connection to the Display (Outdoor and Indoor)
The Fuelight
™
displays may be controlled from a location inside a building or from the base
of the displays. The following subsections provide more detail on both installation types.
Outdoor Installation
This control option permits operation of the
display from the base of the sign structure;
refer to Figure 11 for an example. The DM-100
controller is connected to an outdoor junction
box (J box) mounted on the display pole,
which routes the signal to the sign through a 2-
pair cable (in conduit, where required).
This control option does not require the
controller to be connected to a power outlet. In
this configuration, the DM-100 controller uses
the sign as a power source.
To operate the display using this setup:
•
Connect the 9-pin to 9-pin cable from
the DM-100 controller to the J box
mounted on the display pole.
Indoor Installation
This control option permits operation
of the sign from an indoor control
location; refer to
Figure 12
for an
example. The handheld controller is
connected to an indoor J box, which
routes the signal to the display through
a 2-pair cable (in conduit, where
required).
To operate the display using this setup:
1. Connect the 9-pin to 9-pin cable
from the DM-100 controller to
the 9-pin J box.
2.
Plug the controller’s wall pack
transformer in to a 120 VAC
outlet.
Figure 11: FLD-2000 Outdoor Connection
Figure 12: FLD-2000 Indoor Connection