Daktronics FUELIGHT FL-3000 Series, Руководство по установке и эксплуатации

Страница: 42 / 60

FLR3-1500 and FLD3-2000 Handheld Controller
38
Test Patterns
1� Press the MENU key followed by ENTER to select the Diagnostics Menu .
2� Press the Down Arrow key to reach Test Patterns .
LCD Screen Action/Information Shown
TEST PATTERNS
ENT TO START
ENTER CYCLE BITS
CLEAR TO EXIT
ENTER DIAGNOSTIC
CLEAR TO EXIT
ENTER CYCLE NUMS
CLEAR TO EXIT
Press ENTER to enter the test patterns menu.
Press ENTER to start the CYCLE BITS test pattern. Each digit will turn
on its segments one at a time.
Press the Down Arrow key to move to the next test pattern.
Press ENTER to start the DIAGNOSTIC test pattern. Each price
display will cycle through the following information:
• L.XX – where “XX”is the line number
• A.XX – where “XX” is the hardware address
• d.X – where “X” is the dimming mode (A for automatic, F for
“fixed” or manual dimming)
• t.XX – where “XX” is the internal sign temperature in °C.
Press the Down Arrow key to move to the next test pattern.
Press ENTER to start the CYCLE NUMS test pattern. Each digit will
display numbers 0-9 in sequence.
Press CLEAR at any time to exit the test pattern menu.
Communication Diagnostics
1� Press the MENU key followed by ENTER to select the Diagnostics Menu .
2� Press the Down Arrow key to reach COM Diagnostics .
LCD Screen Action/Information Shown
COM DIAGNOSTICS
ENT TO SELECT
DIAGNOSTICS
POS PORT MONITOR
DIAGNOSTICS
COM PORT TESTS
DIAGNOSTICS
POS STATUS
Press ENTER to access COM port diagnostics.
There are three menu choices described below:
• PoS Port Monitor
• COM Port Tests
• PoS Status
Press the Up and Down Arrow keys to select the appropriate menu
choice.