Daktronics FUELIGHT FL-3000 Series, Руководство по установке и эксплуатации

Страница: 25 / 60

Control Options Setup
21
3� Interconnect the antenna extension cable (C) between the antenna (G) and server
radio (E). Connect the
adapter (F) to the
antenna (G). Use the
tape provided in the
mounting kit to wrap
and protect the
antenna interconnect.
Refer to Figure 43 and
Figure 44 .
4� Connect wall pack
transformer (B) to
server radio (E).
Applying power to the
radio without an antenna
attached may cause
damage!
Client Radio Installation
Install the client radio using one of the methods below.
1� Mount the client radio box on the exterior of the
display with the antenna directly connected.
2� Mount the client radio box inside of the overall display
structure (hidden) with the 10' (3 m) bulkhead routed
to the exterior.
3� Mount the client radio box within the inside of the
Fuelight
™
display. Refer to Figure 45 .
4� Mount the antenna in an optimal location, as shown
in Figure 46 , that is elevated farther off the ground,
has improved line of sight to the server radio antenna,
and within 10' (3 m) of the client radio. Daktronics
provides a 10' (3 m) antenna extension cable to allow
for optimal antenna placement.
5� Use the same tape on the server antenna
terminations on this bulkhead/extension cable
termination. Terminate the antenna cable to the
client radio enclosure and attach the antenna.
Applying power to the radio without an antenna attached
may cause damage!
Figure 43: Adapter Attached to
High Gain Antenna
Figure 44: Connect Extension
Cable to Radio
Figure 45: New Radio Enclosure
and New Antenna
Figure 46: Optimum Radio
Mounting Location