Daktronics DMP-5000 Series, Руководство по эксплуатации

Страница: 45 / 78

Zone Management
41
5. Identify the size of each zone using relative sizes or percentage sizes. Refer to
Figure 63 .
Zone sizes
Figure 63: Zone Sizes
6. Enter the x and y values to determine placement of the zones in the display. Refer to
Figure 64 .
Coordinates for the
top-left corner of each zone
Figure 64: Zone Coordinates
Note: The x and y percentages determine the coordinates for the top-left corner
of each zone. For example, x=0% and y=80% translates to the zone placed
on the left edge of the display and down 80% from the top.
7. Verify the LAYOUT file extension.
8. Save the file.
Copying Zones
The zone copy feature creates copies of zones that can be displayed in other areas
of the output. This action is used frequently with fascia displays. Copied zones are
synchronized; Show Control buttons can specify only the parent zone but also control
any copies of that zone. Copied zones play content more efficiently and with less impact
on the playback as compared to playing the same content multiple times.
To copy zones, follow these steps:
1. Go to the appropriate folder. For Windows
®
7 or Windows
®
10 systems, go to
C:\ProgramData\Daktronics\VNet4\Content
2. Locate the LAYOUT file, and right-click the file to open it in Windows
®
Notepad or
another text editing application.
3. Copy and paste a zone ID line for each of the zones in the V-Net
®
control panel.