1
Introduction
Section 1: Introduction
1.1 Important Contact Information
Daktronics Help Desk: 1-877-697-4000
Project Manager:
Phone Number:
Email: [email protected]
1.2
Display Identification
This section provides information that is helpful in understanding a Daktronics digital billboard
display label. Refer to
Figure 1 while reading the table below.
1.3 Terms Used in this Manual
DMP-8065: digital billboard control card that sends content to the display. The DMP regulates
display content and content hold times.
Lanyard Attachment Ring: a ring found on the back of each module and on the display doors
that attaches to a lanyard and prevents the module or door from falling.
Latch Release: a device that holds the module firmly to the display frame. There are two per
module, one on the top and one on the bottom.
Light Emitting Diode (LED): low-energy, high-intensity lighting unit.
Line Filter: a device that alternates electromagnetic interference that might disrupt local
communication channels and internal equipment operation.
Louver: a black plastic shade positioned horizontally above each pixel row. Louvers increase
display contrast.
Module: consists of a display board with LEDs, a driver board or logic card, housing, a module
latch assembly, and a louver. Each module is individually removable from either the front or
back of the display. Module part numbers vary by pixel pitch.
ASSY NO.
SER. NO.
MFG DATE
BROOKINGS, SD 57006-5128
PHONE 800-325-8766
LL-2306 R01
201 DAKTRONICS DR.
DAKTRONICS
R
0A-1727-0002 HRev: 00
SN: 1001
05/15/13
1234567 0001
DB4203-4X18 MODS
RMN: DAKT-0200-07 SF
220-440/380-415 VAC
2W+N+PE: 50/60HZ
AMPS = 6.6/5.6, WATTS = 2684
Figure 1:
Example 4203 Series Display Label
Display Assembly Number
Display Serial Number
Manufacture Month/Date/Year
DB-4203 Modules High X Modules Wide
RMN: Daktronics - 0200 - 07 Manufactured in Sioux Falls, SD
220-440/315-415 VAC
2 Wire + N Protective Earth Ground
Total Amps (6.6/5.6) and Watts for Display Section (2684)
