Daktronics 4200 Series, Руководство по установке

Страница: 8 / 39

4
DMP-8065: digital billboard control card that sends content to the display. The DMP limits the
display to static content and regulates content hold times.
1.6 Required Tools
The following table lists the minimum tool requirements Daktronics recommends having on
site for each installation. Daktronics provides some specialized tools but it is the installer's
responsibility to provide the majority of tools:
Daktronics-Provided Tools
(located in the spare parts box)
• Electrical tape
• Black cable ties
• Flat-head screwdriver
• Phillips screwdriver
•
3
/
8
" Nut driver
•
5
/
16
" Nut driver
•
7
/
16
" Nut driver
• L-Handle Allen wrench:
1
/
8
"
• Combination wrench:
1
/
8
"
• Splice wrench
• Torque stick
• T-Handle Allen wrench:
1
/
8
"
Customer-Provided Tools
• Allen wrenches: Various sizes
• Bucket truck: Customer must provide until final
proof of performance
• Crane
• Cordless drill
• Drill bits
• Hammers
• Ladder: 6', 8', 10'
• Laptop
• Pry bar
• Ratchet tie-downs/come along
• Screw driver: Phillips and flat-head
• Socket and open end wrench: 1
1
/
16
"
• Socket extension: 3"
• Socket set
• Tape measure
• Torque Allen wrench:
1
/
8
"
• Utility knife
Introduction