Daktronics 4200 Series, Руководство по установке

Страница: 5 / 39

1
Introduction
Section 1: Introduction
This manual provides the necessary information to install and fire-up a Daktronics digital billboard.
Please read and understand all steps in this manual before beginning the installation process. Contact the
Project Manager with any questions.
1.1 Limitation of Liability
Failure to perform the following may null and void any factory warranties:
• Install the digital billboard according to the steps in this manual.
• Provide proper electrical service.
• Ground the display properly.
For the full
Daktronics Warranty and Limitation of Liability, refer to Appendix B at the end of
this manual.
1.2 Important Contact Information
Daktronics Help Desk: 1-877-DAK-HELP
Project Manager:
1.3 Display Identification
This section provides label information that is helpful in understanding a Daktronics digital
billboard display label. Refer to the circled area in
Figure 1 while reading the table below.
Display Assembly Number
Display Serial Number
Manufacture Month/Date/Year DB-4200 Modules High X Modules Wide (Module power in Watts) MODS
RMN: Daktronics - 0200 - 07 Manufactured in Sioux Falls, SD
120/240 VAC, Single Phase, 60 HZ
AMPS (L1/L2) = 23/31
Total Watts for Display Section = 6,480
Figure 1: 4200 Series Display Label