VISTA INSTALLATION AND OPERATION MANUAL
15
version
some sort of command prompt to receive
value.
Keep settings
<Ctrl> K
Tells Vista to save current scan state and
custom settings of commands shown
below.
Scan time interval
<Ctrl> T
nn
<Enter>
where
nn
= time in
seconds from 1-15
seconds
Sets the time, in seconds, that Vista will
pause at each port when scanning.
Note:
Follow with Keep command.
Set keyboard mode
and computer type
Select port, then enter
command:
<Ctrl> M
n
<Enter>
where
n
= 1, 2, or 3
Sets PC's keyboard mode. Must be done
for each computer where specific
keyboard/PC types are required. See
Keyboard Modes on page 9 for a full
description.
Note:
Follow with Keep command.
Set maximum ports
<Ctrl> P
n
<Enter>
where
n
= a single digit
number signifying total
number of ports
Sets the total number of ports to be used.
Limits scanning to this number of ports.
Note:
Follow with Keep command.
Set typematic value
<Ctrl> A
nnn
<Enter>
where
nnn
= a 1-3 digit
number from 0 to 127
indicating KB typematic
value
Sets power-on keyboard typematic action,
which is controlled by Vista. This can be
used to adjust the keystroke rate and delay
to the user preferred setting.
See
Table 4 and Table 5
for how the
typematic value is determined.
Note:
Follow with Keep command.
Set PC mouse type
Select port, then enter
command:
<Ctrl> Q
n
<Enter>
where
n
=
0 (regular PS/2 mouse)
1 (serial mouse)
2 (PS/2 wheel mouse)
Enable/disable PS/2 to serial mouse or
PS/2 to PS/2 Wheel mouse translation.
Must be done for each computer where
translation is desired by switching to it and
issuing the command.
Note:
Follow with Keep command.
