PVX-B
Precision Visual Thickness Gauge
7
Basic Material Type
If the material velocity is unknown, and a sample thickness cannot be taken from the
material, the user may opt to choose a basic material type from a list with
approximate velocity numbers. It’s important to note that these velocities will not
always be an exact representation of the material being tested. Use these values
only if a close approximation is acceptable. Follow the steps below to select a basic
material type:
Selecting a Basic Material Type
1) Press the
MENU
key once to activate the menu items tab. Press the
MENU
key multiple times to tab right and the
ESC
key multiple times to tab left until
the
CAL
menu is highlighted and displaying the submenu items.
2) Use the
UP
and
DOWN
arrow keys to scroll through the sub menu items
until
MATERIAL
is highlighted.
3) Press the
ENTER
key to display the list of material types.
4) Press the
UP
and
DOWN
arrow keys to scroll through the material list until
the appropriate material is highlighted.
5) Press the
ENTER
key to display the confirmation screen.
6) Press the
OK
key to select the material and return to the menu screen, or
ESC
to cancel the material selection.
7) Finally, press the
MEAS
key to return to the measurement screen and begin
taking readings.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
