MAN #650777
2
MOUNTING
A mounting bracket must be purchased for your application. Any BKT-50xx series bracket may be used. The bar mount
brackets can be used for above-the-bar mounting or below-the-bar mounting. The 35° triple-tree mounts are only available
for above-the-bar mounting. The triple-tree mounting bracket replaces the original handle bar mount. The gauge attaches to
the back side of the bracket with the supplied screws.
The bar mount brackets have a curved front bracket and two rear brackets. The longer screws attach the gauge to the back
side of the bracket and the shorter screws go into the recessed openings on the rear brackets. The mount fits tight and will
need to be pulled together by the screws.
To mount the gauge under the bar:
1. Remove the rear plate by unscrewing the four screws.
2. Rotate the rear plate so the mounting tab is on the top.
3. Reattach the rear plate using the four screws.
4. Place bar mount bracket on the handle bars so that the recessed screw holes are on the top.
5. Using the long screws, secure the gauge to the bottom side of the bar mount bracket.
Drawings for using bar mount brackets above the bar and below the bar.
Wiring Diagram
