MAN #650777
6
Programming
SETUP MENU
*To simplify the setup procedure,
The function switch is used to enter setup mode. To get into setup, press and hold either switch while turning the key on.
Another option to enter SETUP is to press and hold both switches while the system is powered. Press and release the switch
to advance through the menus below, press and hold to enter each menu. The left switch goes down, the right switch goes
up through the menu.
Main Menu
Sub Menu
Description
BLUETOOTH
STATUS CHECK
Bluetooth ID and current connection status
OFF
Disable Bluetooth connections
SETUP ONLY
Allow Bluetooth connections only while in setup
ALWAYS ON
Allow Bluetooth connections when key is on
BACK
DIAGNOSTICS
ENGINE
Read diagnostic codes from engine module
SECURITY
Read diagnostic codes from security module
ABS
Read diagnostic codes from ABS module
BACK
LIGHTING
COLOR THEMES
Set factory defined color themes
SET ALL COLOR
Set all areas to one color
LABEL COLOR
Set colors for all labels
MESSAGE COLOR
Set message location colors
BAR COLOR
Set tach/fuel bar color
DIMMING
Set dimming method
OFF
AUTOMATIC
Uses built in sunlight sensor to increase or decrease Backlight
SUNLIGHT
Set sunlight brightness method
OFF
NORMAL
Increases backlight intensity when in direct sunlight
INVERT
Increases backlight intensity and changes background white and text black for
highest contrast.
RESET
Returns all colors and settings to factory default
YES
NO
BACK
SPEED
ADJUST
Adjust speed reading up or down while riding
UNIT
Select MPH or km/h unit
SERVICE RESET
Set miles to service reset value or turn off
PRESET ODO
Odometer preset (Can only be set within the first 100 miles)
BACK
TACH
HIGH WARNING
Set high RPM warning point
DISPLAY
Set tach display to digital or bar reading
DIGITAL
Tach will be displayed in a digital number format
BAR
Tach will be displayed in a fill bar format
8,000 RPM
Maximum RPM bar size
16,000 RPM
Maximum RPM bar size
BACK
BACK
OIL TEMP
UNIT
ON
SENDER
Select sender being used or turn off
SEN-1043
SEN-1044
HIGH WARNING
Set high warning point
TEST
Display sender resistance for troubleshooting
BACK
OFF
BACK
OIL PSI
ON
Enable/Disable option oil pressure reading
LOW WARNING
Set low warning point
TEST
Display sender resistance for troubleshooting
BACK
OFF
BACK
