MAN #650777
7
FUEL
ON
Enable/Disable option fuel level reading
SENDER
OFF
HD 2004
HD 2008
DYNA 04
DYNA 08
CUSTOM
Program custom fuel curve
FAT BAGGER
SPORTSTER
RANGE TO EMPTY
ON
OFF
LEARN RESET
DISPLAY
BAR
Display will show a fill bar for fuel reading
DIGITAL
Display will show a percentage reading for fuel
TEST
Display sender resistance for troubleshooting
BACK
OFF
BACK
VOLT
LOW WARNING
Set low warning point
BACK
DISPLAYS
LEFT TOP
Show/hide performance readings in left top screen location
LEFT BTM
Show/hide performance readings in left top screen location
CENTER
Select speed, tach or gear to be displayed in center screen
RIGHT TOP
Show/hide performance readings in left top screen location
RIGHT BTM
Show/hide performance readings in left top screen location
MBMS
arning points
BACK
GEAR
PRESET
Set gears based on factory setup
TRIKE
P-1200
P-883
LEARN
Learn gears based on speed and RPM
BACK
FACTORY RESET
NO
Resets all settings except odometer to factory defaults
YES
VERSION
Displays software codes of each controller
EXIT SETUP
Setup
PRESS AND HOLD BOTH FUNCTION SWITCHES ONCE THE BIKE IS RUNNING.
Release the switches.
For speed calibration:
Press and
release
either switch to move through the different setup menus.
Press and
hold
either switch to enter a setup menu.
Press and
hold
either switch to save an option, also.
Current selections within a sub menu are denoted with an asterisk (*)
Current selections within a sub menu are denoted with an asterisk (*).
Exiting Setup
At the end of every setup section, steps must be taken to properly exit the setup and return to normal operation.
When a section in this manual s
Exit setup
Press and release the function switch until you see
Press and h
Press and hold
BLUETOOTH Bluetooth menu
Reference this In diagnostic section when using the app for your smartphone or tablet.
The app can aid in setup and also read real time data on your device.
When
,
.
o
Under the word SETUP the Bluetooth ID will be shown.
o
For Android users, this is the ID that you pair to, in Settings/Bluetooth, prior to opening the app.
The Bluetooth
.
STATUS CHECK: Shows
for connection
or OFF with the app.
OFF: turns off the Bluetooth.
SETUP ONLY: Bluetooth is only active in setup.
ALWAYS ON: default mode, works for setup and for real time readings on your smartphone or tablet.
