Manual # 650619
1a. Remove the plastic cover under the steering
column to access the mounts, drop the
column by removing the two bolts shown in
picture, also slide the gear indicator clip off
the column.
1b. The front plastic face needs to be removed, this is done by removing the (4) four Torx T20
screws and disconnecting the headlight and dimmer connectors.
1c. By removing the vent tube on the left and the heater and stereo controls on the right, you will
have better access to remove the (4) four screws securing the cluster. Finally, remove the
gauge cluster and disconnect the harness.
