Manual # 650619
3. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
HDX system. Carefully route the other ends to the control box mounting location.
Buzzer Connector
2. At your own discretion, use the supplied aluminum template\cut guard to open up the inner structure
to allow more length on the harness side for the required cut and splice wiring. Also, the harness
connector will need to be pushed back to clear the HDX cluster; opening up the inner structure will
allow space needed for it to clear otherwise, the connector will need to be removed.
Remove the connector clip
Outline cut template
Use locking pliers to hold the cut
guard into place to protect the
harness from damage while
cutting the inner structure
