Dakota Computer Solutions
•
1579 Lexington Road
•
Green Oaks, IL 60048
•
Tel: 847-816-1337
•
Fax: 847-816-4558
1
Thank you for choosing the VoyagerUTP™. Designed for easy operation, your new VoyagerUTP will
allow you to position your Keyboard, Monitor and PS/2 Mouse up to 1,000 feet (300 meters) away
from your PC.
Features
This product has a number of unique features that allow transparent remote operation of your PC.
•
Access your CPU up to 1,000 feet away using a single CAT 5 twisted pair cable.
•
Fully Adjustable Video Equalization - Compensates for loss of image quality due to cable length
•
Fully buffered signals to ensure consistent remote operation of your PC
•
Intelligent keyboard and mouse emulation ensures the PC boots and operates even when a
keyboard, monitor and mouse are not connected.
•
Advanced Security. Keep your servers locked away in a remote location.
•
Can be used in combination with a keyboard, monitor and mouse switch to give remote access to
multiple servers.
•
Dual Access version allows for an additional keyboard, monitor and PS/2 mouse through the local
unit.
Operation
The VoyagerUTP is simple to operate and works with all PC operating systems - no software is
required. Just connect the units up as described and you are ready to work. Complete keyboard and
PS/2 mouse emulation ensuring that your computer will not lock up due to loss of keyboard and
mouse connection. Your PC will boot even if the remote end of the link is not powered or the
keyboard and/or mouse are disconnected.
Compatibility
To operate in various environments and with hardware from many manufacturers, this product has a
number of specific features. This product has been tested with a variety of hardware. However, it is
impossible to guarantee correct operation with every keyboard, monitor, mouse and motherboard
currently on the market.
The VoyagerUTP is compatible with the following equipment:
•
System Unit:
PC/AT, PS/2 and 100% compatible clones. - PC equipped with PS/2 mouse port*
•
Keyboard:
PC/AT, Enhanced Keyboard. Some older XT/AT autosensing keyboards may not
be compatible
•
Mouse:
PS/2 Mouse, Microsoft Intellimouse and Logitech 3 button.*
•
Monitor:
VGA, Super VGA, XGA & RGB (Sync-on-Green)
* If your PC does not have a PS/2 style mouse port, the VoyagerUTP may be connected to a serial port of
your PC. This is done via a mouse protocol converter (2146-00C). Please contact your dealer for further
details.
Note:
When using the Mouse converter, a PS/2 mouse
must
be used as the input mouse to connect
to the VoyagerUTP.
INTRODUCTION