6.
figure 6
Swivel mount
Swivel Mount
The IR-3000 has a swivel mount (figure 6) which also provides for adjustment of the detection area.
The mount can be adjusted right or left up to 80
o
and up or down up to 50
o
. The swivel mount
can be attached to the desired surface with the provided mount-
i n g
screws. The sensor is then attached to the mount using the notch
on the back (figure 6).
NOTE:
The mount will slide easily into the slot and lock into po-
sition one way only. If the mount does not slide into the slot, do
not force it. Rotate the swivel joint 180 degrees and then slide
the mount into position.
figure 5
48
o
